Devices 0
Type Friendly Name IEEE Address Vendor Model LQI Last Seen Status Protocol Action
Frames
Your hive, laid out by chamber or by device type

Beekeeper

DNS sinkhole — blocks ads & trackers for your whole network
…
–
Queries (24h)
–
Blocked (24h)
–
% Blocked
–
Clients
–
Domains on list
Queries over 24h blocked vs allowed
Recent queries
TimeClientDomainTypeResult
No data yet
Top blocked domains
    Top clients
      Blocklists
      OnListDomainsLast updated
      —
      Add list
      Paste any hosts-format or domain-list URL — e.g. HaGeZi, 1Hosts, or your own. It's fetched and compiled immediately.
      Allowlist (never blocked)
      Denylist (always blocked)
      Configuration
      Loading configuration...
      Changes are written to config.yaml and take effect after a service restart.
      My Account
      Loading account details...
      Admin Authentication Settings
      Loading admin settings...
      Presence Settings
      Loading presence config...
      Loading remote access status...
      Security
      Loading...
      Network key changes require re-pairing all devices. Always keep a backup.
      2.4 GHz Spectrum Analysis

      Scans all ZigBee channels (11–26) for RF energy. Higher bars indicate more interference. Wi-Fi channels 1, 6, and 11 overlap with ZigBee — avoid those ranges where possible. Scan takes ~5–10 seconds; the network will remain operational during the scan.

      Run a scan to see channel interference levels.
      Wi-Fi overlap guide: ZB 11–13 ↔ WiFi ch1  |  ZB 16–17 ↔ WiFi ch6  |  ZB 21–22 ↔ WiFi ch11  |  Recommended: 15, 20, 25, 26
      Click Scan Spectrum to visualise the 2.4GHz environment
      Historical Interference
      No history yet — background scans run hourly.
      Thread Border Router
      Loading Thread status...
      Thread enables Matter-over-Thread device commissioning via the MultiPAN RCP radio. Form a network to begin, then commission Thread devices from the Devices tab using their Matter setup code.
      External API Integrations
      Loading...
      Changes take effect after a service restart.
      Loading speaker settings…
      Loading AI settings…
      Players
      Discovering players...
      Google-Home cast groups appear here automatically. ZigBee Manager's own sync groups (no Google Home needed) are built under Group → OpenZone. WiiM players can be grouped here.
      Create New Group
      Give your group a descriptive name
      This determines what other devices can be grouped
      Selected Device:
      Type:
      Capabilities:

      Loading compatible devices...

      Only compatible devices are shown
      Common Capabilities:
      These controls will be available for the entire group
      Existing Groups 0
      No groups created yet. Create a group above to get started.
      Click the tab to load automations.
      Loading heating intelligence...
      Loading energy data...
      Loading drive data...
      Presence Detection Zones
      Monitor RSSI fluctuations between mesh devices to detect room occupancy
      How it works: When you move through a room, your body affects the radio signals between Zigbee devices. Zones detect these RSSI fluctuations to determine occupancy without dedicated sensors. Best with mains-powered devices (lights, plugs, switches).
      MQTT Messages Stopped
      Total Messages
      0
      Msg/sec
      0.00
      Topics
      0
      Buffer
      0 / 1000
      Time Topic Payload QoS/Retain Size
      Start monitoring to see messages
      Publish Message
      Help
      Topic Wildcards
      • + - Single level wildcard
        e.g., zigbee/+/state
      • # - Multi-level wildcard
        e.g., zigbee/#
      Features
      • Real-time message monitoring
      • Topic filtering with wildcards
      • Payload search
      • Message inspection
      • Test message publishing
      Live Logs
      Packet Capture Disabled
      Live Flow —
      —
      Stats loading…
      Peak history

      Top Talkers
      Clusters
      Loading...
      Loading…